RenQuip Flange Spreaders

Take the hassle out of gasket and valve swap -outs by using the proper flange spreader. When used in conjunction, you can have up to 50,000 lbs of force spreading your flange apart by the simple actuation of a pump. No longer deal with getting banana wedges stuck inside flanges or spending hours, if not days trying to get a flange in a vault to move. We offer a wide range of RENQUIP , made in Scotland, self-integrated flange spreaders along with individual sets and dual sets that come with hose and pump.

The FSW17 flange spreading wedge is powered by a 10,000 PSI pump can enter a flange joint access gap as small as 0.24” and produce a maximum force of 32.6T when used in pairs (as recommended) to push the mating faces of flanges apart. The FSW17 can create a gap up to 3.19” between flange faces with the stepped blocks fitted facilitating the replacement of gaskets, seal ring’s, or other flange face maintenance and testing.

FSW17K

Kit Contents

  •  1 x FSW17 Tool
  • 1 x Safety Block
  • 1 x Safety Lanyard
  • 2x Stepped Blocks with securing screws and allen key
  • 1 x Instruction Manual
  • 1 x Robust moulded carry case

FSW17D

Kit Contents

  • 2 x FSW17 Tool
  • 2 x Safety Block
  • 2 x Safety Lanyard
  • 4x Stepped Blocks with securing screws and allen key
  • 1 x Instruction Manual
  • 1 x Robust moulded carry case

FSW17M

Kit Contents

  • 2 x FSW17 Tool
  • 2 x Safety Block
  • 2 x Safety Lanyard
  • 4 x Stepped Blocks with securing screws and allen key
  • 1 x PH300T Sealed Hydraulic Hand Pump with twin outlets and screw couplers.
  • 2 x Hydraulic Pressure Gauges complete with gauge adaptors.
  • 2 x 2M hydraulic hoses complete with screw couplers.
  • 1 x Instruction Manual
  • 1 x Robust moulded carry case

FSW17P

  • 1 x FSW17P Tool with combined hydraulic cylinder and pump unit
  • 1 x Pump Actuating Handle
  • 1 x Safety Block
  • 1 x Safety Lanyard
  • 2x Stepped Blocks with securing screws and allen key
  • 1 x Instruction Manual
  • 1 x Robust moulded carry case