Flange Alignment

Remove the tedious and dangerous work of rigging up heavy equipment to your pipe & flanges to try and get them aligned when it is time to bolt up. Allow the TorsionX Flange Alignment Pin to help align your flange with ease or if you need a larger distance to cover, Renquip offers both a manual and hydraulic option. Both options allow for a hazard free environment. These solutions remove the fire hazard at jobsites with explosive environments as there is no longer a risk from unwanted sparks while using other methods such as drift pins. Both tooling styles also remove a lot of the wear and tear from previous methods ,allowing better utilization of your work force.

The AT4K is a mechanical flange alignment tool that is used to correct:

• linear misalignment (when the axis of the two flanges are not aligned).
• rotational misalignment (when the axis of the flanges are aligned but the boltholes are not).

The AT4K can produce a maximum reaction alignment force of 4 ton when a torque of 50.2ft.lb is applied to the tool.

Benefits & Features

• High durability High Quality low Maintenance design.
• Tool weight 17.6 lbs
• No external anchor points or rigging required
• Can be used to prevent misalignment during flange joint maintenance
• 100% Load tested and certified
• Prevents gasket pinching during flange joint assembly
• Torque wrench provided for accurate tool loading
• Robust Moulded Case for easy transportation & storage
• Bearings rated to provide overload warning

Kit Contents:

• 1 x AT4 Tool
• 1 x Torque wrench
• 1 x Ratchet and Strap
• •1 x Instruction Manual
• 1 x Robust moulded carry case

The AT9K is a Hydraulic flange alignment tool designed for medium and large flanges that is used to correct: • linear misalignment (when the axis of the two flanges are not aligned). • rotational misalignment (when the axis of the flanges are aligned but the bolt holes are not). The AT9K can produce a maximum reaction alignment force of 9 tons when the maximum hydraulic pressure of 10,000psi is applied to the tool.

AT9K Benefits & Features

• Tool weight 32 lbs

• No external anchor points or rigging required.

• Can be used to prevent misalignment during flange joint maintenance.

• Bearings rated to provide overload warning.

• 100% Load/Pressure tested and certified.

• Prevents gasket pinching during flange joint assembly.

• High durability High Quality low Maintenance design.

• Supplied with pressure rated and capacity matched pump for safety.

• Robust Moulded Case for easy transportation and storage.

Kit Contents

• 1 x AT9 Tool

• 1 x 10,000psi  Hydraulic Sealed Hand Pump

• 1 x 10,000psi  Hydraulic Hose 2.1M long

• 1 x 10,000psi Hydraulic Gauge

• 1 x Ratchet and Strap

• 1 x Instruction Manual

• 1 x Robust moulded carry case